TITAN-1
 
 
 
 
 

Description

The TITAN-1 is designed to mechanize the stowing operations in seam development drifts following the face. The machine is used in coal mines regardless of gas and dust concentration, with the stowing of waste rock in adjacent spaces.

Parameters

Minimum finished cross-section, m2
7
Support
any
Finished section height above the railhead, mm, max
2200
Wall rock breaking
lower, upper, combiner
Seam thickness, m, min
0.5
Angle of the seam bedding, degrees, max
 
 - while working to the dip
25
 - while working to the rise
10
Ultimate strength of rock σcomp, MPa, max
100
Rail gage width, mm
600 and 900
Voltage, V
660
Output, m3/min
0.33-1.00
Rock conveyance range, with two bends and
the 2 m-rise of the route, m, max
80
Stowing pipe nominal internal diameter, mm 
170
Compressed air flow rate, cu.m/min, max 
70
Stowing pipe diameter, mm 
145
Overall dimensions, mm, max:
 
 - TITAN-1 crushing and stowing machine
417514501950
 - VP70 type air-blower
238012502220
Mass of the crushing and stowing machine, kg, max
27800